Recent Project Overviews

City of Camden – Utility Locating for Sewer Replacement Project

Enviroprobe Services performed a utility locating project over three phases for WRc/D&B, LLC.  WRc/D&B was the engineer for the City of Camden.  The project included a utility investigation of approximately 25,602 linear feet of street and public ROW.  The suspect utilities were marked on-site and added to client provided CAD plans for the subject areas.  Geophysical investigation tools included EM-61, GPR and RF pipe and cable locators.  The three phases of work were performed between July of ’03 through August of ’04.

 

Bureau Veritas – Utility Investigation/Boring Clearing

Enviroprobe Services performed utility locating and boring clearing at various sites in the New York City, New Jersey and Eastern Pennsylvania areas.

 

Environ International – Utility Investigation/Boring Clearing

Enviroprobe Services performed utility locating and boring clearing at various sites throughout New York State, New Jersey and Eastern Pennsylvania.

 

New Jersey Transit – Buried Debris Investigation

Enviroprobe Services performed a buried debris investigation in a harbor area in Secaucus, NJ.  An EM-31 was coupled to a DGPS and utilized to identify suspect debris areas in a harbor.  The data was compiled in both In-phase and Quadrature plots for the identification of suspect buried debris.

 

CMX Engineering – Various Utility & UST Investigations

Enviroprobe Service, Inc. has performed various Geophysical projects including UST investigations and utility investigations.  The projects performed including a utility investigation at the former Burlington City Water Works facility.  The former Water Works facility was surveyed utilizing EM-61, GPR and RF pipe and Cable Locators.  The EM-61 data was compiled into a conductivity plot and evaluated for suspect utilities.

 

Southeastern Transit Authority (SEPTA) – Conduit Locating

Enviroprobe Service, Inc. performed a concrete inspection project utilizing high-frequency radar to identify conduit in a concrete slab.  The survey area was comprised of approximately 60,000 sq. ft. of concrete.

 

The RETEC Group – Utility Investigation/Boring Clearing

Enviroprobe Services performed utility locating and boring clearing at various sites in the New York City area.  The New York City area projects were performed for ConEdison.  The RETEC Group acted as the prime contractor ConEdison.  Enviroprobe is included on ConEdison’s list of private utility mark-out contractors.

 

 Example Plots

Utility Mapping

 

Underground Storage Tank (UST) Locating

 

Underground Void Detection: existing voids and potential collapsing hazards such as underground storage tanks and building foundations